DMT Presenter Control Guia do Utilizador descarregar pdf (Página 74)

S1 User Handbook

SERIAL COMMUNICATION PROTOCOL

Command Description Response

PFL:a? Read PFL Button Status PFL:a,b,c,d,e

RMA:a,b,c,d,e,f Congure Input 1 Remotes ACK:

A = Channel number.

1 = Ch 1

2 = selects Ch 2

etc

a = selects Ch 10

B = Start Function

1 = Momentary

0 = Continuous

C = Stop Function

1 = Momentary

0 = Continuous

D = Mode

0 = Remotes Disabled

1 = Start from ON & Fader Up

2 = Telco Mode (Starts on On press)

3 = Start from ON & Fader Up or CUE/PFL

4 = Telco Mode with CUE/PFL

5 = no change

E = Tally

0 = Tally Back Disabled

1 = Tally Back Enabled

F = Automation Tally (End of Track ON Button Flash Mode)

0 = Tally Disabled

1 = Tally Enabled

N.B. Channels 1-5 on Input 1 do not have stop remotes

The ‘C’ parameter must still be supplied, but will be ignored for the

mic inputs 1-5A..

If B is changed from 1 to 0, the fader may need to be cycled

before the change is made

If C = 0, it will force the channel into START/STOP mode (see CON)

If D= 2, it will force the channel into START/STOP mode (see CON)

If E=1, a GPI must be congured as a tally back for this input

(see GPI)

N.B. Tally cannot be enabled if the Remotes are not set to

TELCO mode

If F=1, a GPI must be congured as an Automation Tally Input

(see GPI)

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80

Sem comentários

DMT Presenter Control Guia do Utilizador Página 74