DMT Presenter Control Guia do Utilizador Página 44

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 80
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 43
32
S1 User Handbook
4
ADVANCED CONFIGURATIONS
ADVANCED CONFIGURATIONS
4 Advanced Congurations
The following section will show you how to truly maximise the mixers potential. Learn how
to control and trigger external equipment from your mixer, send visual messages to the
presenter enable o air group discussions and much more.
The following section is divided into these parts:
1. Remote Control – Control external equipment with fully congurable remote control
functions.
2. General purpose inputs and outputs – Use a single or multiple combination of mixer
events to control external function. Page 33.
3. SCi control interface – Learn how to congure your mixer using the dedicated
software interface, page 35.
User Guide – Section 4-1 Using the Remote Control
The remote control ports are available so that the user can control external equipment from
the mixer. The two remote connectors on the rear panel contain all of the START & STOP
outputs from the input channels. Each channel input has its own START and STOP remote
controls except the microphone inputs which only have START outputs. In the eventuality
that you require a microphone stop control signal, this could be congured using one of the
general purpose outputs.
Remote Mode
The remotes can be congured in a variety of dierent ways:
• RemotesDisabled
- The remotes are not used and are not controlled by the desk
- If the stop control is set to continuous, then the stop signal will always be on
- If the stop control is set to pulsed, then the stop signal will always be o
• StartfromON&FaderUp
- The start signal is generated when the channel is live (when the ON button is
solid green)
- A stop signal is generated when the channel is not live
• TelcoMode
- The Telco mode sends the start pulse when the channel is initially armed (ON
button glows RED)
This allows a hybrid to connect before the channel goes live.
- n this mode the stop signal is generated when the ON button is turned o (not
glowing)
Vista de página 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

Comentários a estes Manuais

Sem comentários