DMT Presenter Control Guia do Utilizador descarregar pdf (Página 30)

S1 User Handbook

USER GUIDE

Dim / Mute

When a channel with the monitor mute option congured has PFL selected, the control

room monitors can be set to either dim or mute. If the fader is then opened, the monitors

will mute irrespective of this setting. The red mute LED will still illuminate if the monitors

are set to DIM rather than MUTE on PFL.

Meter Controls

Program / Meters Follow Monitors

The PGM / MFM Button selects whether the meters should display

PGM only or display the selection that is heard in the presenters

headphones. The selection of this button can be locked if required.

This button is illuminated RED if MFM is selected.

PPM / VU

The meters can be congured

to display either PPM or VU. A

red LED is illuminated next to

the currently active scale. The

meter mode is a conguration

option available through SCi

The PPM meters have a 1-7 scale

and will be congured such

that a 1kHz signal, at 0dBu at

the PGM output, will indicate a

meter reading of 4. Each mark

on the PPM scale indicates a

4dB change in signal level.

The VU meter operates between -20 and +3 Volume units and follows the standard

denition for a VU meter. Please see ANSI C16.5-1942, BS 6840 or IEC 60268-17 for more

details.

User Guide – Section 2-5 Output Buses

PGM Output

The PGM output provides stereo balanced XLR outputs. The PGM

Output is used as the main transmission bus. All channels that are on

and faded in are mixed on to this bus.

Fig 2-27: Program/

Meters Follow

Monitors

Fig 2-28: PPM / VU

Fig 2-29: PGM Output

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

Sem comentários

DMT Presenter Control Guia do Utilizador Página 30