DMT Presenter Control Manual do Utilizador descarregar pdf (Página 40)

Set-temperature:

The temperature controller tab is used to adjust

the set temperature for each chamber (range:

10 - 45

C with 0.1

C accuracy). If a temperature

is changed, click the button Change and the

change is up loaded to the heat controller.

The setting is permanently stored in the heat

controller.

Status:

“Status” indicates status for each chamber:

: The Myograph is not connected to the heat controller.

: The Myograph is connected. The heat has not reached set temperature.

: The Myograph is connected. The heat has reached set temperature.

Actual Temperature:

The microscope controller tab shows the actual temperature measured in the

chamber placed on the microscope.

Light Intensity:

To change the light intensity, use the track bar.

The options are as follows:

1: Use the mouse to drag the slider up and

down.

2: Use Arrow UP and Arrow DOWN, to change

the IR light intensity

with one step.

3: Use Page UP and Page DOWN to change the

IR light intensitywith ten steps.

4: Use Home and End, to force the IR light fully

off or on.

5: To manually adjust the IR light intensity, adjust the knob on

the back of the microscope.

Culture Myograph System Model 202CM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

Sem comentários

DMT Presenter Control Manual do Utilizador Página 40